In the purchase of five axis styrofoam engraving machine, the price of this question is every customer will ask. Price plays a very important role in a cooperation. Many customers use the price to decide whether to buy the equipment, but many friends don't know that there are too many uncertain factors about the price, and they can't tell you how much it must be. Let's talk about it

1、數控系統是決定五軸保麗龍雕刻機的重要因素

1. Numerical control system is an important factor to determine the price of five axis styrofoam engraving machine

數控系統等于是五軸保麗龍雕刻機的一個大腦，加工所有的動作、程序都是靠著它去完成的，在選擇數控系統時，需要綜合多種因素，如使用環境、工件情況、加工工藝、采購預算等，在對加工要求嚴格的情況下，建議選擇進口的數控系統，在加工要求不高、預算有限制的場合，可選擇國產數控系統或臺灣系統。

Numerical control system is equal to a brain of five axis styrofoam engraving machine. All actions and programs of the machining center are completed by it. When selecting the CNC system, it is necessary to integrate various factors, such as the use environment, workpiece conditions, processing technology, procurement budget, etc. in the case of strict processing requirements, it is recommended to choose imported CNC system If the budget is limited, the domestic CNC system or Taiwan system can be selected.

2、刀庫是決定五軸保麗龍雕刻機的主要因素

2. Tool magazine is the main factor that determines the price of five axis styrofoam engraving machine

加工的率不僅在于有一個精細的操作系統，還要有一個非常重要的輔助功能部件，就是刀庫，刀庫是加工存放刀具的容器，刀庫的換刀時間對一臺機床的效率起著重要作用。五軸保麗龍雕刻機常使用的刀庫有斗笠式刀庫和圓盤式刀庫。

The high efficiency of machining center not only lies in having a fine operating system, but also has a very important auxiliary function component, which is the tool magazine. The tool magazine is the container for storing the tools in the machining center. The tool changing time of the tool magazine plays an important role in the efficiency of a machine tool. Five axis Baolilong engraving machine often uses the tool magazine of hat type and disc type.

3、主軸也非常重要

3. The spindle is also very important

主軸轉速一般都很高,都在8000rpm/min以上,主軸轉速10000rpm/min以上為高速化主軸，機床在高轉速的加工下，會產生大量的熱量，高切屑的熱量附著在機床工作臺和工件表面不僅會影響工件的加工精度，還會對機床造成損壞，所以一般主軸會配油冷或水冷的冷卻系統。主軸常見的傳動方式有皮帶式傳動和直接式傳動，直接式傳動適合在高速中輕切削，對于高速主軸一般選擇直接式。

The spindle speed is generally high, which is above 8000rpm / min, and it is high-speed spindle when the spindle speed is above 10000 RPM / min. the machine tool will produce a lot of heat under the high-speed processing. The heat of high chip attached to the machine tool workbench and workpiece surface will not only affect the machining accuracy of the workpiece, but also cause damage to the machine tool. Therefore, the spindle is generally equipped with oil cooling or water cooling cooling cooling system. The common transmission modes of spindle are belt drive and direct drive. Direct drive is suitable for light cutting at high speed, and direct drive is generally selected for high-speed spindle.

4、硬軌和線軌五軸保麗龍雕刻機差距

4. Price gap between hard track and line rail five axis styrofoam engraving machine

硬軌機速度慢一些，但剛性好些，抗撞，主要用于重切削,模具方面。線軌機速度快，精度好些，主要用于輕切削,產品方面，相對來說沒有硬軌機的壽命長。現在很多人買五軸加工都會選擇兩線一硬，因為這樣既能提高速度又可以加大切削力度，性價比高。

Hard rail machine speed is slower, but rigidity is better, anti-collision, mainly used in heavy cutting, mold. The linear rail machine has high speed and good precision, and is mainly used for light cutting. In terms of products, it has no longer service life than hard rail machine. Now many people buy a five axis machining center will choose two lines and one hard, because this can not only improve the speed but also increase the cutting force, which is cost-effective.

5、加工規格也會影響差距

5. Processing specifications can also affect the price gap

加工產品的規格決定了機型的規格大小，機型大所用的材料自然比機型小的所用材料少，所以大機型和小機型也會有不同，不過不會相差太多。

The specification of the processed products determines the size of the model. The materials used for large models are naturally less than those for small models. Therefore, there will be different prices for large and small models, but there will not be much difference.