聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
業內資訊
雕刻機想要好用的我們需要做哪些事情？
來源：http://www.tj9.net 時間：2020-11-18
雕刻機是我們經常使用的雕刻設備，由于一些原因，我們有時候會長時間使用雕刻機，長久以來，雕刻機就會出現一些故障，變得不再好用。那么，要想雕刻機好用必須做的事是什么呢?下面給您介紹一下
Engraving machine is the engraving equipment we often use. For some reasons, we sometimes use the engraving machine for a long time. For a long time, the engraving machine will have some faults and become no longer easy to use. So, if you want to carve machine easy to use, what must be done? Let's introduce it to you
1、穩定電壓：保持電壓的穩定，是保護機器電器件的要素，一般雕刻機有漏電保護裝置，熱敏電阻等保護措施，電壓不穩或者溫度過高，機器都會報警。
1. Stable voltage: to keep the voltage stable is the first element to protect the electrical parts of the machine. Generally, engraving machines have leakage protection devices, thermistor and other protective measures. If the voltage is unstable or the temperature is too high, the machine will alarm.
2、強化潤滑：導軌、絲杠等配件是運行過程中的軌道，定期注入潤滑油有助于運行軌道運行穩定、的作用。
2. Strengthen lubrication: guide rail, lead screw and other accessories are the track in the process of operation. Regular injection of lubricating oil is conducive to the stable and safe operation of the running track.
3、冷卻水溫：石材雕刻切屑力大，主軸、刀具的冷卻程度取決于水溫，良好的降溫效果，有助于主軸和刀具的使用壽命，夏季防止水溫過高，冬季警惕水結冰。
3. Cooling water temperature: stone carving chip force is large, the cooling degree of spindle and cutting tool depends on the water temperature. Good cooling effect is helpful to the service life of spindle and cutting tool. The water temperature should be prevented too high in summer and water freezing in winter.
4、選擇好刀：石材雕刻耗材主要是刀具，好馬配好鞍，選擇一把好刀，可以持續長時間使用，如果經常更換刀具，對刀夾、主軸都會有損害，機器經常啟動、停止工作不連貫，對機器也會有影響。
4. Choose a good knife: the stone carving consumables are mainly tools. A good horse with a good saddle and a good knife can be used for a long time. If the tool is often replaced, the tool holder and spindle will be damaged, and the machine will start and stop incoherently, which will also affect the machine.
5、減輕負荷：機器是加工材料的不是儲放平臺，使用過程中盡量避免機器橫梁上堆放過重的材料，對機器的愛護，是您長期使用的保證。
5. Reduce the load: the machine is the processing material, not the storage platform, in the process of use, try to avoid stacking too heavy materials on the machine beam, the care of the machine is your guarantee for long-term use.
6、檢查和清潔：定期或長時間強度工作過后，保持機器的潔凈，避免淤泥堆積，對機器做個檢查，更好的延長機器壽命。要想雕刻機好用必須做的六件事
6. Inspection and cleaning: after regular or long-term intensive work, keep the machine clean, avoid sludge accumulation, and make an inspection on the machine, so as to better extend the service life of the machine. Six things you have to do to make the engraving machine work well
- 上一篇：石材雕刻機可用于哪些材料的雕刻工作呢？
- 下一篇：雙工序開料機的配置都有哪些？
