隨著雕刻行業的不斷發展，雕刻機被需要的越來越多，使用就會有問題的產生，有些問題很簡單。有些需要排查一下，問題應如何解決？今天墨淵的小編就跟大家一起來聊一聊保麗龍雕刻機的雕刻速度該如如何控制？
With the continuous development of engraving industry, engraving machine is needed more and more, there will be problems in use, some problems are very simple. Some need to be investigated. How should the problems be solved? Today, Moyuan's editor will talk with you about how to control the carving speed of styrofoam carving machine?
1、對于雕刻速度，石材雕刻機的進給速度和主軸的轉速是不確定的。但是，刀具直徑越大，轉速要求越低。速度越快，轉速要求越高，切割深度越大。它很慢，但不能高速和低速進給，因此很容易磨損工具；

1. For the engraving speed, the feed speed of the stone engraving machine and the rotation speed of the spindle are uncertain. However, the larger the tool diameter, the lower the speed requirement. The faster the speed, the higher the speed requirement, the greater the cutting depth. It is very slow, but it can not feed at high speed and low speed, so it is easy to wear tools;
2、對于石材雕刻機進行浮雕雕刻時，要考慮的是及時切割過程中出現的；在規劃雕刻路徑時，刀具的數量根據刀具半徑和深度分層。
2. For stone engraving machine for relief carving, the first thing to consider is to clear the cutting process in time; when planning the carving path, the number of tools is layered according to the radius and depth of the tool.
3、數控石材雕刻機床選用鎢鋼刀比較多，到具有合金刀，有pcd的刀，雕刻石材吃刀量比較大，所以選用耐用的刀具比較好。
3. CNC stone carving machine tool selection tungsten steel knife is more, to have alloy knife, have PCD knife, carving stone cutting capacity is relatively large, so choose durable tool is better.
以上就是小編為大家介紹的關于保麗龍雕刻機控制速度的相關內容，如有任何疑問的可以點擊：http://www.tj9.net會有在線客服
The above is about the control speed of styrofoam engraving machine. If you have any questions, you can click: http://www.tj9.net There will be online customer service
進行解答。
Answer.