Wood carving machine is mainly used for wood processing, making it more beautiful. At present, there are many kinds of woodworking engraving machines on the market, and the quality and price of products are also uneven. Therefore, you need to choose carefully when you choose to buy them. Here are five main points to help you choose woodworking engraving machines.

一看木工雕刻機幅面的大小。客戶應根據業務的需求和資金狀況，選擇適合自己的雕刻機的型號及其功率的大小。一般小幅面的雕刻機有600mm×600mm和600mm×900mm，進料寬度是700mm。雕刻雙色板是小幅面雕刻機基本的應用，接納性很好。再小一點的雕刻機與其相差不多，但雕刻雙色板時要裁板，比較麻煩而且造成不必要的浪費。

A look at the size of woodworking engraving machine format. Customers should choose their own engraving machine model and power according to the business needs and financial situation. Generally, small format engraving machines have 600mm × 600mm and 600mm × 900mm, and the feeding width is 700mm. Engraving two color board is the basic application of small format engraving machine, which has good acceptability. The price of a smaller engraving machine is not much different from it, but it is troublesome and unnecessary to cut the two-color board when engraving.

大幅面的雕刻機有1200mm×1200mm、200mm×1500mm、1500mm×2400mm、2400mm×3000mm，以上機型的雕刻機進料寬度都超過1350mm，現在市面上的有機玻璃和PVC板的尺寸都是1300mm×2400mm，所以這幾款機型對需求大幅面雕刻機的客戶比較適合。

There are 1200mm × 1200mm, 200mm × 1500mm, 1500mm × 2400mm and 2400mm × 3000mm engraving machines with large format. The feeding width of the engraving machines of the above models is more than 1350mm. The sizes of plexiglass and PVC plates on the market are 1300mm × 2400mm, so these models are more suitable for customers who need large format engraving machines.

二要注意雕刻機的主軸電機。主軸電機是電腦雕刻機的重要組成部件，其性能對電腦雕刻機整機的性能有著關重要的影響。加工主軸通常分為兩類：主軸和大功率切斷主軸。

Second, we should pay attention to the engraving machine spindle motor. Spindle motor is an important component of computer engraving machine, its performance has a crucial impact on the performance of computer engraving machine. Machining spindle is usually divided into two categories: spindle and high power cut-off spindle.

1、精細加工主軸的特點是低噪音、高轉速、高度，適合加工特別精細的工件，如印章、銘牌、胸牌禮品等。此類電機通常為高速變頻電機，功率較小，般在250W以下。缺點是切斷厚的材料的能力較差，不合切斷較厚的材料。

1. Fine processing spindle is characterized by low noise, high speed, high height, suitable for processing particularly fine workpieces, such as seals, nameplates, badges, gifts and so on. This kind of motor is usually high-speed variable frequency motor, the power is small, generally below 250W. The disadvantage is that the ability of cutting thick material is poor, which is not suitable for cutting thick material.

2、大功率切斷主軸，主要用于切斷、大功率刻，特點是功率大，切割能力強，特別適合割宇、三立體字，當然也可以制作胸牌、銘牌、印章等。此類大功率主軸根據電機的特性一般可分為無刷高速交流電機和有刷交流電機。

2. The high-power cutting spindle is mainly used for cutting and high-power engraving. It is characterized by high power and strong cutting ability. It is especially suitable for cutting Yu and three-dimensional characters. Of course, it can also be used to make badges, nameplates, seals, etc. This kind of high-power spindle can be divided into brushless high-speed AC motor and brushless AC motor according to the characteristics of motor.

三是雕刻機控制方式和速度的選擇：

The third is the choice of control mode and speed of engraving machine

控制方式現在可分為三種：A、所有的運算工作有電腦控制完成，雕刻機在工作時電腦處于工作狀態，無法進行其它的排版工作，這樣可能因電腦的誤操作而造成廢品。B、采用單片機的控制，這種控制器可以在雕刻機工作的同時進行排版，但不能關閉電腦，這實際上相當于節余一臺電腦，并減少了電腦的誤操作而造成的廢品。C、采用USB口傳輸數據，系統有著32M以上的內存容量。只要保存完文件，就可以馬上完全脫離電腦、關閉電腦或進行其它排版。這種方式大大提高了雕刻機的工作效率。

Now the control mode can be divided into three kinds: A. all the calculation work is controlled by computer. When the engraving machine is working, the computer is in the working state and can not carry out other typesetting work, which may cause waste products due to the wrong operation of the computer. B. With the control of single chip microcomputer, this controller can set the typesetting while the engraving machine is working, but it can't turn off the computer, which is equivalent to saving a computer and reducing the waste products caused by the wrong operation of the computer. C. Using USB port to transfer data, the system has more than 32m memory capacity. As long as the file is saved, you can immediately get off the computer, shut down the computer or do other typesetting. This way greatly improves the working efficiency of the engraving machine.

四要注意其導軌。大幅面雕刻機一定要采用加寬的進口的方型導軌，其負載能力和精度保持能力是圓型導軌的30倍以上，保證了雕刻機的高質高速。

Fourth, pay attention to the guide rail. The large format engraving machine must adopt the widened square guide rail. Its load capacity and accuracy retention capacity are more than 30 times of the circular guide rail, which ensures the high quality and high speed of the engraving machine.