The processing of the dragon is also known as the "Dragon carving machine" or "foam carving machine". With the increasingly extensive use of foam plastic mold, the demand for the processing of the styrofoam model CNC machine tool is increasing. Conventional styrofoam engraving machine has models of 1322042540 and so on. Because styrofoam has large overall processing size, high precision requirements and great technical difficulties, there are few enterprises with Styrofoam processing capacity.

一，我們要了解保麗龍加工主軸的性能和功能，雕刻機的主軸電機也是很關鍵的，因為雕刻主軸電機是長時間連續工作的，所以如果雕刻主軸電機不好會很影響雕刻機的使用，比如電腦雕刻機的使用。保麗龍雕刻機功率小也要是7.5KW的。

1、 If we want to know the performance and function of the spindle of styrofoam, the spindle motor of engraving machine is also very important, because the engraving spindle motor works continuously for a long time, so if the engraving spindle motor is not good, it will affect the use of engraving machine, such as the use of computer engraving machine. Baolilong carving machine power is small, also if 7.5kW.

二，就是雕刻主軸電機的速度可調范圍，一般速度可調范圍是每分鐘幾千到三萬轉，若速度不可調或速度可調范圍較小，那么就說明該保麗龍雕刻機應用范圍就受到很大的限制，因為雕刻不同的材料必須用不同的雕刻主軸轉速。

2、 It is the adjustable speed range of engraving spindle motor. Generally, the adjustable speed range is thousands to 30000 revolutions per minute. If the speed is not adjustable or the adjustable speed range is small, it means that the application range of the styrofoam engraving machine is greatly limited, because engraving different materials must use different engraving spindle speed.

三，控制器一般也分為兩類:一類控制器只是做驅動，而其所有運算工作由電腦來完成，在雕刻機工作時電腦處于等待狀態，無法進行排版工作。另一類控制器采用單板機或單片機控制，這種控制器實際上就是一臺電腦，所以只要保麗龍雕刻機一開始工作，電腦馬上就可以進行其他排版工作，特別是較長時間雕刻時，該優勢特別明顯。

3、 Generally, the controller can be divided into two types: one is just for driving, and all the calculation work is completed by the computer. When the engraving machine is working, the computer is in the waiting state, and can't carry out typesetting. Another kind of controller is controlled by single board computer or single chip microcomputer. This kind of controller is actually a computer, so as long as the polaron engraving machine starts to work, the computer can immediately carry out other typesetting work, especially when engraving for a long time, this advantage is particularly obvious.

四，雕銑機床體制造工藝:大功率保麗龍雕刻機工作時要求床體一定要穩定，所以，長期大功率雕刻應采用鑄造本體才能保證其加工精度和穩定性。絲桿和導軌也是雕刻機的重要組成部分，好的絲桿和導軌是雕刻機長期使用時其精度和性能的保證。

4、 Engraving and milling machine body manufacturing process: high power styrofoam engraving machine work requires the bed must be stable, so long-term high-power engraving should use casting body to ensure its processing accuracy and stability. Lead screw and guide rail are also important parts of engraving machine. Good lead screw and guide rail are the guarantee of precision and performance when engraving machine is used for a long time.

總而言之，保麗龍雕刻機與普通的木工雕刻機不同，不僅僅體現在配置方面。如果大家有機會，可以到工廠實地考察一下生產廠家生產加工實力以及配件使用情況。

In a word, styrofoam engraving machine is different from ordinary woodworking engraving machine, not only in the configuration. If you have the opportunity, you can go to the factory to investigate the production and processing strength of the manufacturer and the use of accessories.