聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
業內資訊
石材雕刻刀壞的原因有一下幾點?
來源：http://www.tj9.net 時間：2021-04-25
有時接到客戶電話,說刀具怎么一老斷,而且還非常嚴重,其實這跟石材雕刻機的使用,石材雕刻刀,還有石材的工藝認識不足的原因.可以在使用中累計經驗,什么石材用什么刀具,用什么樣的給進速度,而且還和編程人員的路徑也有關系.簡單來來說下石材雕刻刀壞的原因有一下幾點.
Sometimes I get a call from a customer, saying that the cutting tool is broken, and it's very serious. In fact, this is due to the use of stone carving machine, stone carving knife, and the lack of understanding of stone technology. I can accumulate experience in the use, what kind of stone, what kind of cutting tool, what kind of feeding speed, In short, there are several reasons for the broken stone carving knife
1、雕刻機本身機器原因，Z軸速度太快，容易斷刀，刀夾變形容易斷刀。選主軸功率，石材雕刻機一般3000W就可以了，加工速度可以保證，又能較為省電；在石材雕刻機技術尚不成熟的階段選擇一款質量較好的石材雕刻刀是你必須要考慮的。
1. Engraving machine itself machine reason, z-axis speed is too fast, easy to break the knife, knife clip deformation easy to break the knife. Choose the spindle power, stone carving machine generally 3000W can be, processing speed can be guaranteed, and can save electricity; In the stone carving machine technology is not mature stage, choose a better quality stone carving knife is you must consider.
2、材料不符合，金剛石適合雕刻大理石，但是不可能所有的版畫書法都可以雕刻。金剛石適合質地細膩的硬質石材。刀具的使用壽命與走刀的速度關系很大，越硬的石材走刀速度要求越慢
2. Materials do not match, diamond is suitable for carving marble, but not all of the engraving calligraphy can be carved. Diamond is suitable for hard stone with fine texture. The service life of the cutting tool is closely related to the cutting speed. The harder the stone is, the slower the cutting speed is required
3、雕刻石材的工作環境有水，沒水降溫,余熱就很容易斷.刀尖與石材接觸部位要有充足的循要有充足的水分。
3. If there is water in the working environment of carving stone, if there is no water to cool down, the waste heat will be easily broken. There should be sufficient circulation and water in the contact part between the knife tip and stone.
4、在編程時要保證每次下刀時都要柔性進給；對操作者的要求：在編程時要保證每次下刀時都要柔性進給。刀尖部位要旋轉時接觸物體。
4. In programming, flexible feeding should be ensured every time cutting; Requirements for the operator: when programming, it is necessary to ensure that flexible feed is required every time when cutting. Contact the object when the tip of the knife needs to rotate.
以上就是石材雕刻刀具容易斷的原因,經驗都是慢慢累積起來的.新手可以沒斷次到分析下原因,然后記錄下來,時間長了就非常有經驗了.
The above is the reason why stone carving tools are easy to break. Experience is accumulated gradually. Novices can analyze the reasons without breaking times, and then record them. After a long time, they will be very experienced
- 上一篇：保麗龍雕刻機的速度慢是什么原因？
- 下一篇：如何選擇質量過硬的開料機？
