聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
新聞資訊
雙工序開料機開出的板材崩邊解決方法
來源：http://www.tj9.net 時間：2021-06-09
在使用雙工序開料機加工板材的時有時候會遇到一種問題——加工出來的板材崩邊。那么這個問題到底是什么原因造成的呢？有什么好的辦法可以避免出現這種情況？
When using the numerical control cutting machine to process the plate, sometimes we will encounter a kind of problem - the edge collapse of the plate. So what is the cause of this problem? What's a good way to avoid this?
1、板材材質原因
1. The reason of the plate material
在開料中常用的板材有密度板和刨花板。這兩種板材硬度高、成本低和易加工等原因被廣泛應用板式家具生產當中。但是這兩種板材有同一個缺點，那就是這兩種板材都是壓制而成，如果粘結力度不強的話，開料的時候就容易崩邊，所以這就需要我們在選購板材時多注意。
Density board and particleboard are commonly used in cutting. These two kinds of boards are widely used in panel furniture production because of their high hardness, low cost and easy processing. But these two kinds of plates have the same disadvantage, that is, these two kinds of plates are made by pressing, if the bonding strength is not strong, it is easy to collapse when cutting, so we need to pay more attention when purchasing plates.
2、刀 具的鋒利度原因
2. The reason of tool sharpness
數控開料機開料是用刀 具開料的，刀 具的鋒利度直接就影響到開料表面的粗糙程度。如果刀 具的鋒利程度不強，那么開出來的板材就會出現崩邊，所以需要在使用數控開料機時注意刀 具的磨損程度，及時更換刀 具。
CNC cutting machine is cutting with cutting tool, the sharpness of the cutting tool directly affects the roughness of the cutting surface. If the sharpness of the cutting tool is not strong, then the plate will appear edge collapse, so we need to pay attention to the wear degree of the cutting tool when using the CNC cutting machine, and replace the cutting tool in time.
3、主軸轉速原因
3. Cause analysis of spindle speed
數控開料機的主軸轉速好壞直接影響加工效果，如果主軸轉速不夠的話，開出來的板材就非常有可能出現崩邊。
The spindle speed of CNC cutting machine has a direct impact on the processing effect. If the spindle speed is not enough, the plate is likely to have edge collapse.
4、刀 具裝夾不牢固
4. Tool clamping is not firm
刀 具裝夾不牢固，在加工產品的過程中會造成板材的崩邊和刀 具的損壞。
Tool clamping is not firm, in the process of processing products will cause plate edge collapse and tool damage.
5、有的廠家生產的開料機他的真空吸附臺面吸附能力不是很強，在加工產品的時候工件吸附不牢靠，造成板材的移位，這也是造成板材崩邊的原因。
5. The vacuum adsorption table of the cutting machine produced by some manufacturers has not strong adsorption capacity. When processing products, the workpiece is not firmly adsorbed, resulting in the displacement of the plate, which is also the cause of the plate edge collapse.
- 上一篇：石材雕刻機做立體效果怎么樣？
- 下一篇：如何選擇泡沫雕刻機？
