泡沫雕刻機出現偏差的原因有哪些？

來源：http://www.tj9.net 時間：2021-08-18 

泡沫雕刻機的偏差，就是指雕刻機在雕刻完成物件的時候，看所雕刻物件的結果與本來預期的期待值的偏差，這個差別就是看設備的一個精 密度，如果其精 密度沒有出錯的話，正常按照所設定的參數來進行運行，是不會出現偏差情況的。

The deviation of the foam engraving machine is the deviation of the engraving machine's object and the expected value when it engraving the object. The difference is to see the precision of the equipment. If its precision is not wrong, it will not deviate according to the normal parameters.

而設備的精 密度，其影響的原因，有多個可能性：材料、測算、操縱。

The precision of the equipment is affected by many possibilities: material, calculation and manipulation.

材料

Material Science

就是說原材料質量要好，而且如果本來你需要雕刻的物件是80*50，你給的材料是有所偏差的，比如是80*49，甚更少一點，這個雕刻的結果當然就會出現偏差，所以我們給原材料的時候，一般都是給大一點點，便于雕刻。

In other words, the quality of raw materials is better first, and if the object you need to carve is 80 * 50, the material you give is biased, such as 80 * 49, or even less. Of course, there will be a deviation in the carving result, so when we give raw materials, we generally give them a little bigger to facilitate carving.

測算

Calculate

測算是設備自己計算的，就有可能出現一些差錯，這個大多出現在泡沫雕刻機出現錯誤，比如說有亂碼或是數據問題導致，不然一般計算機都不會出現測算的錯誤。

Calculation is the calculation of the equipment itself, there may be some errors, most of which appear in the bubble carving machine errors, such as garbled or data problems, otherwise the general computer will not be calculated error.

操縱

control

因為設備都是自動控制，每一個數控刀具的位置，處理完成后的角度，還有一刀下去的深度，這些都是設備在控制，這就導致，如果是操縱期間，某一個刀具出現錯誤，無法操縱，這跟操縱桿出現問題，都會導致雕刻物件出現偏差。

Because the equipment is automatically controlled, the position of each NC tool, the angle after processing, and the depth of a tool are all controlled by the equipment, which leads to the deviation of the engraved object if a tool is wrong and cannot be manipulated during manipulation, which is a problem with the joystick.

想要不出現偏差，就需要我們在雕刻前，對于設備進行檢查，確定操縱的刀具都沒有問題，可以辨識雕刻機發出的每個指令，并精 準無誤的實行；

If we want to avoid deviation, we need to check the equipment before engraving, make sure that there is no problem with the manipulated tools, recognize each instruction issued by the engraving machine and implement it accurately;

確定完設備后，就需要確定材料的尺寸問題，不能比你需要雕刻出來的物件小，要長寬高都大10%，是好的比例，既不浪費材料，又能保證雕刻質量。

After determining the equipment, you need to determine the size of the material. It should not be smaller than the object you need to carve. It should be 10% larger in length, width and height. It is a good proportion, which not only does not waste materials, but also ensures the carving quality.

• 上一篇：四工序數控開料機及質量判斷
• 下一篇：選擇石材雕刻機的6大要素？

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...