蜜桃视频成人m3u8,久久久国产亚洲精品,成人18在线

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

業內資訊

雕刻機廠家有哪些刀具的選擇雕刻材料方法說明？

來源：http://www.tj9.net 時間：2021-08-25

雕刻機廠家有哪些刀具在相同版塊里要是是同一類數控刀具，做的方式可以一塊兒導出雕刻。通常狀況下選擇雕刻各種各樣材料先雕里邊的后調外邊的，先雕小的后調大的，先雕都沒有雕通的后雕雕通的刀具路徑。

What tools do engraving machine manufacturers have? If they are the same type of NC tools in the same section, the way they do can export engraving together. Under normal circumstances, we choose to engrave all kinds of materials, first engrave the inside and then adjust the outside. First, we should carve out small and large cutting tools.

一、雕刻機廠家刀具在自動控制系統使用方法說明

1、 Instructions for the use of engraving machine manufacturer's cutting tools in the automatic control system

在雕刻機和軟件都沒有封閉式、材料薄厚不會改變、數控刀具不會改變的狀況下不用從頭開始對刀。如從頭開始裝到了數控刀具還要從頭開始對刀才可以開展雕刻。在雕刻機和雕刻機廠家軟件都沒有封閉式、材料都沒有挪動，排版設計的版塊都沒有修改，雕刻的版塊是同－個的狀況下不用從頭開始界定雕刻起點。

When the engraving machine and software are not closed, the thickness of materials will not change, and the NC tool will not change, there is no need to set the tool from the beginning. If the NC cutter is installed from the beginning, the engraving can be carried out only after the cutter is adjusted from the beginning. When the engraving machine and the engraving machine manufacturer's software are not closed, the materials are not moved, the layout design sections are not modified, and the engraving sections are the same, there is no need to define the engraving starting point from the beginning.

雕刻機廠家刀具在自動控制系統

Engraving machine manufacturer's tool in automatic control system

二：有機玻璃板（亞克力）雕刻機廠家割開通常用直刀。

2： Plexiglass plate (acrylic) engraving machine manufacturers often use straight knives.

家具板材越厚就用刀徑越大的直刀．三維線雕刻通常用平底尖刀類，要雕刻的圖型越大就選擇視角越大、刃寬越大的平底尖刀。三維立體雕刻機圖通常用尖刀類里的三維立體刀，要雕刻的圖型越大就選擇視角越大的三維立體刀．

The thicker the furniture plate, the larger the diameter of the straight knife is used. The flat bottom sharp knife is usually used for three-dimensional line carving. The larger the pattern to be carved, the larger the angle of view and the wider the blade. The three-dimensional carving machine drawing usually uses the three-dimensional knife in the center sharp knife category. The larger the pattern to be carved, the larger the angle of view

三維立體雕刻機圖

Three dimensional engraving machine drawing

三：雙色板割開雕刻機廠家通常用平底尖刀。

3： Two color plate cutting engraving machine manufacturers usually use flat bottomed sharp knives.

雕刻機三維線雕刻通常用平底尖刀類，要雕刻的圖型越大就選擇方向越大、刃寬越大的平底尖刀。

The three-dimensional line carving of engraving machine usually uses flat bottom sharp knife. The larger the pattern to be carved, the larger the direction and the wider the blade.

四：木料割開雕刻機廠家通常用直刀，家具板材越厚就用刀徑越大的直刀。

4： Wood cutting engraving machine manufacturers usually use a straight knife. The thicker the furniture plate, the larger the knife diameter.

五：翡翠玉石雕刻機廠家用下刀工作能力強的分叉物品先把外觀設計刻畫出去。

5： The design of the forked articles with strong cutting ability for household use in the jade carving machine factory shall be described first.

翡翠玉石雕刻機雕刻的材料比較硬，那樣去掉毛坯雕刻一次了，里邊的弧面生產加工下去就非常容易的多了，速率也可以調大，進而減少生產加工時長。

The carving material of jadeite carving machine is relatively hard. In that way, the blank can be removed for carving once. It is much easier for the arc surface inside to be produced and processed, and the speed can also be increased, so as to reduce the production and processing time.

翡翠玉石雕刻機雕刻的材料

Materials carved by jade carving machine

六：雪浮板（PVC)割開雕刻機廠家通常用數控直刀，家具板材越厚就用刀徑越大的直刀。

6： Snow floating board (PVC) cutting engraving machine manufacturers usually use CNC straight knife. The thicker the furniture plate, the larger the knife diameter.

三維立體圖線雕刻通常用平底尖刀類，要雕刻的圖型越大就選擇視角越大、刃寬越大的平底尖刀。三維立體雕刻通常用尖刀類里的三維立體刀，要雕刻的圖型越大就選擇視角越大的三維立體刀．

The flat bottom sharp knife is usually used for three-dimensional drawing line carving. The larger the pattern to be carved, the larger the angle of view and the wider the blade. The three-dimensional knife in the center sharp knife category is usually used for three-dimensional carving. The larger the pattern to be carved, the larger the angle of view