聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
業內資訊
雕刻機怎樣確定主軸轉速？
來源：http://www.tj9.net 時間：2022-01-21
雕刻機怎樣確定主軸轉速？
How to determine the spindle speed of engraving machine?
1.在加工時確定主軸轉速是非常重要的一個環節，它直接關系到刀具壽命，工件加工效果等。
1. Determining the spindle speed during machining is a very important link, which is directly related to the tool life, workpiece machining effect, etc.
2.確定主軸轉速要從材料入手。材料的硬度越高，在加工時主軸轉速就越低。材料越粘，加工時主軸轉速越高。
2. To determine the spindle speed, first start with the material. The higher the hardness of the material, the lower the spindle speed during machining. The more sticky the material, the higher the spindle speed during machining.
3.確定主軸轉速還要從根據使用刀具的直徑。使用刀具直徑越大，主軸轉速越低。
3. Determine the spindle speed according to the diameter of the tool used. The larger the tool diameter used, the lower the spindle speed.
4.確定主軸轉速還要根據使用主軸電機的情況。
4. Determine the spindle speed according to the use of spindle motor.
5.從上面的主軸電機功率曲線中我們可以看出，當主軸轉速降低時，電機的輸出功率也在降低，如果輸出功率低到一定程度，就會影響加工，這樣反而對刀具壽命和工件效果更加不好，所以，在確定主軸轉速時，要注意保證主軸電機有一定的輸出功率。
5. From the above spindle motor power curve, we can see that when the spindle speed is reduced, the output power of the motor is also reduced. If the output power is low to a certain extent, it will affect the processing, which will even worse the tool life and workpiece effect. Therefore, when determining the spindle speed, pay attention to ensure that the spindle motor has a certain output power.
6.總的來說，要根據材料，刀具直徑和輸出功率來確定主軸轉速。.在確定主軸轉速時一定要根據自己的具體情況進行分析，決定主軸的轉速，不要死用建議參數。
6. In general, the spindle speed shall be determined according to the material, tool diameter and output power When determining the spindle speed, we must analyze according to our own specific situation to determine the spindle speed, and do not use the recommended parameters.
本文由石材雕刻機為您提供，我們的網站是：http://www.tj9.net/我們將以全心全意的熱情為您提供服務，歡迎您的訪問
This article is provided by stone carving machine. Our website is: http://www.tj9.net/ We will serve you with wholehearted enthusiasm. Welcome to visit
- 上一篇：3050雕刻機主軸溫度過高怎么辦？
- 下一篇：為什么石材雕刻機在雕刻的時候要加水？
