面對五軸加工的程序編輯相信每一個傳統數控編程人員都會感非常頭疼的問題。一般像三軸機床只需要設定直線線路就OK了, 而五軸加工比三軸加工復雜多了、結構也變得多樣化;相同的一段程序 代碼可以在三軸加工上使用, 但是不一定就能在五軸加工身上使用。

　　Facing the program editors of five-axis machining center, we believe that every traditional NC programmer will feel very headache. Generally, like a three-axis machine tool, it only needs to set a straight line to OK, while a five-axis machining center is much more complex than a three-axis machining center, and its structure has become diversified. The same program code can be used in a three-axis machining center, but not necessarily in a five-axis machining center.

　　五軸加工和三軸的工作流程不一樣多了AC兩個旋轉運動軸所用的程序也是截然不同的。五軸加工程序編程除了要編輯直線運動之外, 還要計算AC旋轉運動的相關計算,。比如旋轉的角度路線、非線性出現的誤差、刀具旋轉運動的距離計算等, 需要計算處理的信息量很大, 五軸加工程序編程可想而知極其抽象。要不然說五軸加工程序能讓編程人員極為頭疼。

　　Five-axis machining center and three-axis workflow are different. The procedures used for AC two rotating axes are quite different. In addition to editing linear motion, the program of five-axis machining center also calculates the related calculation of AC rotation motion. For example, the angular route of rotation, the errors of non-linearity, the calculation of the distance of tool rotation movement, etc., need a lot of information to be calculated and processed, and the programming of five-axis machining center can be imagined to be extremely abstract. Otherwise, five-axis machining center program can make programmers extremely headache.

　　五軸加工的操作和編程密不可分的關系, 如果是用戶想為機床增添一些特殊功能, 會使編程和操作會更為復雜。只有反復實踐, 才能掌握操作要點。像那種經驗豐富的編程、操作人員的缺乏, 是五軸加工技術普及的一大阻力。

　　Five-axis machining center operation and programming are inseparable. If the user wants to add some special functions to the machine tool, the programming and operation will be more complex. Only by repeated practice can we grasp the key points of operation. The lack of experienced programmers and operators, like that, is a major obstacle to the popularization of five-axis machining center technology.

　　在國內許多廠家都是從國外購買了五軸加工, 由于操作技術培訓和售后服務不到位, 五軸加工很多功能被放置不會用, 機床利用率很低, 很多時候覺得還不如使用三軸加工。所以我們的技術操作和編程是非常重要的，五軸加工雖然現在不是很普及，但是他的行業場景是有逐漸增加的。這就是我們需要考慮的未來發展前景，所以現在就是需要了解摸透五軸加工。

　　Many manufacturers in China have purchased five-axis machining centers from abroad. Because of the inadequate training of operation technology and after-sales service, many functions of the five-axis machining centers are not used and the utilization rate of machine tools is very low. In many cases, it is better to use three-axis machining centers. So our technical operation and programming are very important. Although the five-axis machining center is not very popular now, its industry scene is gradually increasing. This is the future development prospects we need to consider, so now is the need to understand and understand the five-axis machining center.