Stone engraving machine is a processing system which can load NC engraving program and automatically control the movement of engraving machine. It usually consists of engraving program calculation system and NC system.

其工作原理是：計算機通過雕刻軟件將需要的雕刻的圖形數字化，生成每個步驟的雕刻程序(一般為G代碼、HPGL格式文件)，通過USB接口或其他數據傳輸接口(RS232、RS485等)傳輸給控制系統，然后控制系統采用特定的算法將輸入的路徑信息轉化為數控信息，控制器把這些信息轉化為驅動步進電機或伺服電機的信號(脈沖串)，控制雕刻機X、Y、z三軸的進給.

Its working principle is: the computer digitizes the engraving graphics needed by engraving software, generates the engraving program of each step (generally G code, HPGL format file), and transmits it to the control system through USB interface or other data transmission interfaces (RS232, RS485, etc.), and then the control system uses a specific algorithm to convert the input path information into numerical control information, and the controller converts these information The information is converted into signals (pulse train) to drive stepper motor or servo motor to control the feeding of X, y and Z axes of engraving machine

同時，石材雕刻機的高速旋轉主軸帶動按加工材質配備的刀具，對固定于機械本體的工件進行銑削，即可雕刻出在計算機上設計的各種平面或立體圖形文字，實現雕刻的自動化加工。

At the same time, the high-speed rotating spindle of the stone carving machine drives the cutting tool equipped according to the processing material to mill the workpiece fixed on the machine body, which can carve out various plane or three-dimensional graphics and characters designed on the computer, and realize the automatic processing of carving.

由本系統的設計指標可知，其目標是設計開發一套針對石材雕刻機的控制特點，能滿足石材雕刻機控制需求并具有高性價比的普及型中檔的嵌入式雕刻機數控系統。因此，本系統需要從速度方面入手，解決好運動的快速性問題，同時兼顧系統的制造成本，使硬件造價控制在預期的范圍內。可見，系統的處理速度和成本控制是本系統方案設計應考慮的。

According to the design index of this system, the goal is to design and develop a set of popular and middle-class CNC system for stone carving machine, which can meet the control requirements of stone carving machine and has high cost performance. Therefore, the system needs to start from the speed, focus on solving the problem of fast movement, and take into account the manufacturing cost of the system, so that the hardware cost can be controlled in the expected range. It can be seen that the processing speed and cost control of the system are the key points to be considered in the scheme design of the system.

根據現有數控技術的發展水平，目前提高數控系統處理速度的途徑有以下幾種：

According to the current development level of CNC technology, there are several ways to improve the processing speed of CNC system

1)PC+高速運動控制卡；

1) PC + high speed motion control card;

2）由高性能通用CPU，如X86、Pentium等組成的工控板；

2) Industrial control board composed of high-performance general-purpose CPU, such as x86, Pentium, etc;

3）高速運動控制芯片；

3) High speed motion control chip;

4）采用ARM等高性能單片機替代高速運動控制芯片；

4) High performance MCU such as arm is used to replace high-speed motion control chip;

相信通過小編的介紹，您對于石材雕刻機有了更深層的了解。

I believe that through the introduction of Xiaobian, you have a deeper understanding of stone carving machine.