操作四工序開料機應該注意什么？

來源：http://www.tj9.net 時間：2021-10-08 

注意一、操作數控開料機要注意。時刻注意設備的，這是整個工作順利進行的前提和基礎。人類作為設備的操作者，確實應該有足夠的意識，使用正確的操作方法，切不可因為自己的粗心大意而把整個操作看得太重。

Note 1. Pay attention to safety when operating the CNC cutting machine. Always pay attention to the safety of equipment, which is the premise and foundation for the smooth progress of the whole work. As the operator of equipment, human beings should really have enough safety awareness and use correct operation methods. They must not pay too much attention to the whole operation because of their carelessness.

四工序開料機

Four process cutting machine

注意二、操作數控開料機時注意設備狀況。在運行過程中，每一種設備都處于正常狀態，但如果處于異常狀態，肯定會表現出來。作為設備的操作人員，要對設備的整體狀態進行判斷，及時解決問題，否則會對設備造成較大的影響。

Note 2. Pay attention to the equipment condition when operating the NC cutting machine. During operation, each equipment is in normal state, but if it is in abnormal state, it will certainly show. As the operator of the equipment, judge the overall state of the equipment and solve the problems in time, otherwise it will have a great impact on the equipment.

注意三、在操作數控開料機的過程中，做好這些事情對每個操作人員來說都是非常重要的。當我們能夠快速掌握相關方面時，所有的操作事項都會變得更加順暢，整個過程中發生事故的幾率也會降低。作為設備的操作者，在操作前盡量對各方面都有詳細的了解和認識，否則整個操作過程無法更好的完成。

Note 3. It is very important for each operator to do these things well in the process of operating the NC cutting machine. When we can quickly grasp relevant aspects, all operation matters will become smoother and the probability of accidents in the whole process will be reduced. As the operator of the equipment, try to have a detailed understanding and understanding of all aspects before operation, otherwise the whole operation process cannot be completed better.

• 上一篇：影響五軸保麗龍雕刻機的因素是多少？
• 下一篇：數控開料機主軸使用以及維修保養方法!

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...